110893 LA210/LA100 Version: 2.2, June 1987 Submitted by: Harold Bencowitz, Beaumont, TX Operating System: RT-11 V5.3, TSX-PLUS V6.20 Source Language: C Hardware Required: VT100, VT200 or VT300 compatible terminals and LA100 or LA210 compatible printers Abstract: LA210/LA100 is an interactive program to change the setup parameters of the LA100 and LA210 printers. It has been tested on RT-11 V5.3 and TSX-PLUS V6.20. A VT100 or VT200 series terminal is required. The user chooses a set of printer settings. This set can then easily be altered. Once the user is satisfied with the settings, they can be sent either to the printer or to a disk file. The user can create several disk files each of which can be "printed" for a different printer configuration,. The settings last used when the program terminates are stored and can be recalled for editing and reuse. The program also stores the device name of the printer (changeable). The source file can be easily configured to build versions for the LA210 or the LA100 (runable versions of each are included). The Whitesmith's C compiler and library are needed to build the program from the sources. Other needed libraries are included. The differences between the LA210 and LA100 versions, building instructions, and instructions for use of the program are given at the beginning of the source code file (LA210.C). Also included is another program with versions for the LA210, (SLA210) and LA100 (SLA100). This program also changes printer settings but is command line driven, rather than menu driven, and is much less sophisticated in checking entries than the other program. It's document is also at the beginning of the source code file (SLA210.C). Notes: The submitter welcomes reports of bugs, comments, or suggestions. Complete sources not included. Media (Service Charge Code): One RX02 Diskette (LA) Format: RT-11, 600' Magnetic Tape (MA) Format: RT-11