THIS FILE GIVES  YOU  INFORMATION  TO  HELP  YOU  START  THE
INSTALATION OF THE RSX CAMAC DRIVER.

     1.  FOR RSX11MV1 USE CMDRV.MV1 AND USRTB.MV1 AND FOLLOW
         INSTRUCTIONS  IN  THE RSX MANUAL.  THIS REQUIRES AN
         EXPERT.

     2.  FOR RSX11MV3 COPY THE FILES ON THIS  MEDIA  (USEING
         FLX  IF  NEED BE) TO 200,200 ON THE SYSTEM DISK AND
         TYPE "@[200,200]CMINS".

     3.  READ AND FOLLOW INSTRUCTIONS CAREFULLY.

     4.  GOOD LUCK BUT IT IS REALLY VERY EASY.

THE INSTALATION TAPE  ALSO  HAS  SOME  DOCUMENTATION  FILES.
THESE ARE:

     1.  CAMAC.DOC WHICH IS THE WRITE UP FOR THE DRIVER

     2.  LSTPRO.DOC WHICH IS THE DESIGN SPEC.  FOR THE  LIST
         PROCESSING PART OF THE DRIVER.

     3.  CAMSPR.DOC WHICH IS AN SPR FORM.

IF YOU HAVE PROBLEMS OR SUGESTIONS PLEASE FILL OUT THE  FORM
GENERATED  BY  PRINTING  OUT THE CAMSPR.DOC FILE.  SEND THIS
FORM TO:


                    DANIEL B. CURTIS
                    FERMILAB CL-8E
                    P.O. BOX 500
                    BATAVIA,IL 60510