110488 RSXPROM Version: 1.3, July 1981 Submitted by: Richard C. Noonan, NOVA Biomedical, Newton, MA Operating System: RSX-11M V3.2 Source Language: MACRO-11 Memory Required: 41K Hardware Required: DATA I/O System 19 ERROM Programmer with Computer Remote Control, second serial port. Keywords: EPROM Abstract: RSXPROM provides the capability for downloading Intel HEX format files from an RSX-11M system to a DATA I/O System 19 EPROM programmer (with Computer Remote Control) via a serial line. RSXPROM reads the specified HEX file from disk, transmits a chunk of the file (representing 4K bytes of object code) starting at the specified address, and sets up the Block Limits in the DATA I/O for programming the specified type of EPROM. RSXPROM has been used successfully with the DATA I/O single-PROM modules for the 2708 and the 2716/2732, and with the Gang Programming module. Restrictions: File to be transmitted must fit in memory buffer. Works only with 2708, 2716/2516, and 2732/2532 type EPROMS. Media (Service Charge Code): One RX01 Diskette (KA) Format: FILES-11, 600' Magnetic Tape (MA) Format: FILES-11