110875 RSTS/E 2780 Version: 3.0, May 1987 Submitted by: Digital Equipment Corporation Operating System: RSTS/E V6B or later Memory Required: 16K Bytes Hardware Required: DUP-11, KG11 for UNIBUS, DUV-11 for QBUSS Keywords: Emulators Abstract: The RSTS/E-2780 software emulates the communications protocol of an IBM 2780 device, while running as a user job on a suitably configured RSTS/E system. The RSTS/E-2780 transmits files stored on any medium supported by the RSTS/E Operating System. It stores files on any output medium supported by RSTS/E except DECtape. Magnetic tape operation can cause timeout errors, unless the tape is positioned at the start of the file when transmission or reception is about to begin. Files can be printed directly on any line printer supported by the host operating system. RSTS/E supports a spooling feature that allows users running with the RSTS/E-2780 to queue one or more files for subsequent transmission. The processing requirements of the 2780 protocol can perceptibly degrade RSTS/E response time during transmission or reception. The ordering information for the manuals is as follows: . Order 110875 (EC) for the "Installation Notes" . Order 110875 (EA) for the "User's Guide" Notes: Will run on PDP-11/23 or MicroPDP-11 by answering system generated question 2780 with a YES/Q. Program also works on Version 9.0 of RSTS/E. Documentation available in hardcopy only. Sources not included. Media (Service Charge Code): User's Manual (EA), User's Manual (EC), 600' Magnetic Tape (MA) Format: DOS-11