MBF COMPANY CONFIDENTIAL FIELD INFORMATION BULLETIN

SERVICE GROUP(S): MICRO                MFG: PRIMAGES

 NACS  TYPE(S): 1600,1601,9801,9802    MFG. MODEL(S): 100,90,I

CATEGORY: PRINTER                      DESC: DAISY  WHEEL PRINTER

                   *** TABLE OF CONTENTS AS OF 12/20/90 ***
FIB 00001. NACS  MACHINE TYPES AND FEATURE NUMBERS....................02/05/87
FIB 00002.PAGEMATE 3 ENVELOPE FEED UNIT...............................02/05/87
FIB 00003.P/N FOR TRACTOR UNITS.......................................10/02/87
FIB 00004.POWER SUPPLY DETERMINATION..................................10/02/87


PRINTER-PRIMAGES-100,90,I---------------------------Table Of Contents Pg01 of 01
FIB 00001                                                             02/05/87


PARTS PREFIX = PMxxxxxx


               ***  NACS  MACHINE TYPES AND FEATURE NUMBERS ***

                                   1600,1601

SHDBK-331   PRIMAGE 1 USER'S MANUAL
SHDBK-332   PRIMAGE 90/100 PRINTERS & PAGEMATE I,II,III MAINTENANCE MANUAL
SHDBK-333   PRIMAGE 90/100 USER'S MANUAL
SHDBK-336   PRIMAGE 1 MAINTENANCE MANUAL


MICRO PRINTER CLASS


                              *** SPECIAL TOOLS ***

                   *** SPECIAL ADMINISTRATIVE PROCEDURES ***

ORIGINATOR:


PRINTER-PRIMAGES-100,90,I---------------------------FIB001 Pg001


FIB 00002                                                             02/05/87

                     *** PAGEMATE 3 ENVELOPE FEED UNIT ***

SYMPTOM: ENVELOPE JAM FROM AUTOMATIC FEED.

PROBLEM DETERMINATION:   ENVELOPES JAM WHEN FEED VERTICALLY THROUGH THE SHEET-
FEEDER. OLDER ENVELOPE FEEDERS WERE SHIPPED WITH THE SILVER GUIDE PLATE BEVELED
EDGE FACING THE SHEET-FEEDER.

FIX:  PRIMAGES IS NOW SHIPPING THE ENVELOPE FEEDER WITH THE GUIDE PLATE TURNED
AROUND SO THAT THE ENVELOPES ARE FED AT ANGLE. THE PLATES ON OLDER UNITS CAN BE
TURNED AROUND SO THAT THE BEVEL LEANS INTO THE ENVELOPE FEEDER. THIS FIX HAS
BEEN VERIFIED AT PRIMAGE AND AT  NACS  EAST TO PROVIDE CONSISTANT ENVELOPE
FEEDING.

ORIGINATOR: JOHN HILL


PRINTER-PRIMAGES-100,90,I---------------------------FIB002 Pg001


FIB 00003                                                             10/02/87

                       *** P/N FOR TRACTOR UNITS ***


THERE ARE TWO TYPES OF FORMS TRACTOR UNITS USED ON PRIMAGE PRINTERS.

   1.   SQUARE HORIZONTAL DRIVE SHAFT  -  PM000097                           

   2.   SPLINED HORIZONTAL DRIVE SHAFT  -  PM000135


ORIGINATOR: G. PHILLIPS


PRINTER-PRIMAGES-100,90,I---------------------------FIB003 Pg001


FIB 00004                                                             10/02/87

                       *** POWER SUPPLY DETERMINATION ***


THERE ARE THREE POWER SUPPLIES NOW USED ON PRIMAGE PRINTERS.


   1.  PRIMAGE MODEL I(45) AND 90        PM 000014

      - HAS TERMINAL BLOCK ON BOTTOM
      - 4 LARGE CAPACITORS SCREWED TO PCB # 1032896
      - BRIDGE RECTIFIERS MOUNTED ON CHASSIS


   2.  MODEL 90 VERSION 2         PM 000116

      - FAN CONTROL (BLACK BOX) ON BOTTOM
      - BLACK AND ORANGE WIRES WITH 2 PIN CONNECTOR
      - 4 CAPACITORS SOLDERED TO PCB # 1301197
      - BRIDGE RECTIFIRES MOUNTED ON PCB                                     
      - TERMINAL BLOCK WITH SMALL LUGS INSIDE BLACK BOX ON BOTTOM


   3.  NEW STYLE FOR MODEL I, 90, 90GT     PM 000135

      - TERMINAL BLOCK ON BOTTOM (NO FAN CONTROL)
      - 4 CAPACITORS SOLDERED TO PCB # 1301197
      - BRIDGE RECTIFIRES MOUNTED ON PCB                                     


NOTE:  PM 000135 CAN BE USED AS A REPLACEMENT FOR A PM 000014, BUT NOT FOR
         A PM 000116.


ORIGINATOR: G. PHILLIPS


PRINTER-PRIMAGES-100,90,I---------------------------FIB004 Pg001