MBF COMPANY CONFIDENTIAL FIELD INFORMATION BULLETIN SERVICE GROUP(S): MINI,LARGE MFG: DATAPRODUCTS NACS TYPE(S): 4279,4280 MFG. MODEL(S): D300,D600 CATEGORY: PRINTER DESC: 300/600 LPM DRUM *** TABLE OF CONTENTS AS OF 12/20/90 *** FIB 00001.GENERAL INFORMATION.........................................05/14/87 FIB 00002.Ribbon Fault Lights due to binding ribbon motors............05/14/87 FIB 00003.64/96 Character Drum Switch (S2) Replaced By Jumpers........05/14/87 PRINTER-DATAPRODUCTS-D300,D600----------------------Table Of Contents Pg01 of 01 FIB 00001 05/14/87 *** GENERAL INFORMATION *** PARTS PREFIX: MM19XXXX 300 LPM Drum Printer This is a shuttle-drum printer which uses a reluctance pickup for character detection off the print drum. There is a two position shuttle driven by the servo drive mechanism. The printer uses a helical drum, with a 17 consecutive character repeating format (ex. letter "A" 1st char. , letter "Q" 17th char). There are 68 hammers, that with the two posion shuttle, will give a total of 136 print positions (only 132 characters will print). 600 LPM Drum Printer This is a non-shuttle drum printer which also uses a reluctance pickup for character detection off the print drum. The printer has a helical drum, with a straight character format (ex. all letter "A"'s in a row). There is a full complement of 136 hammers, with only 132 characters printable. *** NACS MACHINE TYPES AND FEATURE NUMBERS *** Sorbus Model 4279 - 300 LPM Printer Sorbus Model 4280 - 600 LPM Printer *** AVAILABLE DOCUMENTATION *** S-HDBK 270 B/4 Service Manual SM 3030 - 300 LPM Printer B/4 Logic Diagrams LD 3030 - 300 LPM Printer S-HDBK 201 B/4 Service Manual SM 3040 - 600 LPM Printer B/4 Logic Diagrams LD 3040 - 600 LPM Printer Data Products Technical Manual 2230 - 300 LPM Printer (2 Books) Data Products Technical Manual 2260 - 600 LPM Printer (2 Books) *** AVAILABLE TRAINING *** No training available at present date *** SPECIAL TOOLS *** PRINTER TESTER - Sorbus part number - 0R997262 (works with Centronics Parallel and Industry Standard Serial) *** SPECIAL ADMINISTRATIVE PROCEEDURES *** ORIGINATOR: J. O'Brien PRINTER-DATAPRODUCTS-D300,D600----------------------FIB001 Pg001 FIB 00002 05/14/87 *** Ribbon Fault Lights due to binding ribbon motors *** SYMPTOM: Ribbon faults have been occuring due to binding drive motors or the drive gears. This trouble can usually be identified by the occurrence of ribbon fault lights in only one direction of the ribbon's movement. When the ribbon reverses direction, the light's do not occur. PROBLEM DETERMINATION: Binding ribbon drive motor or drive gears. FIX: Remove and disassemble the ribbon motors for cleaning, refer to MSA-269 for complete details. Clean the drive gears and install the motors with 0.005 in. wink between gear teeth. Rotate the gears to ensure that they do not bind at any point. ORIGINATOR: S. Schwartz PRINTER-DATAPRODUCTS-D300,D600----------------------FIB002 Pg001 FIB 00003 05/14/87 *** 64/96 Character Drum Switch (S2) Replaced By Jumpers *** The 64/96 character drum switch (S2) has been removed from the Control Logic . PCBA's (MM191011 and MM192011) and replaced with hard jumpers. The jumpers are the same for both boards, W32 jumpered for a 64 character drum and W33 jumpered for a 96 character drum. They are located under IC U66 U67, depending on the Control Logic PCBA. ORIGINATOR: J. O'Brien PRINTER-DATAPRODUCTS-D300,D600----------------------FIB003 Pg001